A4 Cabriolet Mk2
Note
|
| 1 - | Brake carrier |
| q | Bolt to brake caliper housing |
| 2 - | Guide pins, 30 Nm |
| 3 - | Protective caps |
| q | Insert into bearing bush |
| 4 - | Protective cap |
| q | Push onto bleeder valve |
| 5 - | Bleeder valve, 15 Nm |
| q | Before screwing in, grease thread with thin coat of lithium grease -G 052 150 A2- |
| 6 - | Bearing bush |
| q | Insert into brake caliper housing |
| 7 - | Brake caliper housing |
| 8 - | Retaining spring |
| q | Note correct installation position. |
| q | Engage onto both brake caliper housing studs and onto outer pad retaining spring. |
| 9 - | Protective cap |
| q | Do not damage when inserting piston |
| q | Apply a thin coat of lithium grease -G 052 150 A2- |
| 10 - | Piston |
| q | Apply a thin coat of lithium grease -G 052 150 A2- to piston |
| 11 - | Seal |
| q | Apply a thin coat of lithium grease -G 052 150 A2- |
