Indicated on display of vehicle diagnostic, testing and information system -VAS 5051A-: |
t
| Display zone -1- indicates “Store channel 81”. |
t
| Area -3- displays the original PIN or “0” and the new PIN. |
–
| Adopt and store entry by touching key -4-. |
t
| Display zone -1- indicates “Store channel 1, value 1 stored”. |
Note t
| Touch ← key to return to selection program. |
t
| Entering the PIN erases the chassis number stored in the operating and display unit, Climatronic control unit -J255-. The operating and display unit, Climatronic control unit -J255- is then ready to adopt the chassis number transmitted by the control unit in dash panel insert -J285- via the convenience data bus system. |
–
| Terminate self-diagnosis → Chapter and switch off ignition. |
–
| Interrogate fault memory of operating and display unit, Climatronic control unit -J255- → Chapter and erase faults displayed → Chapter. |
The fault “Control unit incorrect chassis number” is no longer displayed or can now be erased (if adaption has been performed correctly). |
–
| Check the chassis number now stored in the operating and display unit, Climatronic control unit -J255- → Chapter (Reading measured value block, display group “081”). |
|
|
|