audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Measured value blocks as of display group "020” > < Table of codes "1” transmitted by dash panel insert (and learnt during "Basic setting” function)

A4 Cabriolet Mk2

Table of codes transmitted by control unit in dash panel insertJ285 and learnt during “Basic setting” function (codes “2”)
   
Table of codes transmitted by control unit in dash panel insert -J285- and learnt during “Basic setting” function (codes “2”)
CodeSignificance
0    No assignment
–  Not displayed with all versions.
     Fillers, no assignment
    Code transmitted by control unit in dash panel insert -J285-
  0  Vehicle with no auxiliary heater
–  Setting in adaption channel “18” of control unit in dash panel insert -J285- → "Guided fault-finding" function of vehicle diagnostic, testing and information system VAS 5051 and → Electrical system; Rep. Gr.01
  1  Vehicle with auxiliary heater
–  Setting in adaption channel “18” of control unit in dash panel insert -J285- → "Guided fault-finding" function of vehicle diagnostic, testing and information system VAS 5051 and → Electrical system; Rep. Gr.01
     Fillers, no assignment
    0100Vehicle with 4-cyl. engine
    0110Vehicle with 6-cyl. engine
    1000Vehicle with 8-cyl. engine

  Note
t  If the control unit in dash panel insert -J285- transmits the code (adaption) “Vehicle with auxiliary heater”, the operating and display unit, Climatronic control unit -J255- expects information from the auxiliary heater control unit -J364-. If this is not received, a fault is stored in the operating and display unit, Climatronic control unit -J255-.
t  The heating of the coolant after a cold start calculated by the operating and display unit, Climatronic control unit -J255- differs depending on engine version.
   

Measured value blocks as of display group "020” > < Table of codes "1” transmitted by dash panel insert (and learnt during "Basic setting” function)