| –
| Pull overheating fuse -A- out of mount -B- at auxiliary heater housing. |
Note | t
| The overheating fuse -A- is secured to the housing by way of the clip -C- in the holder -B-. |
| t
| To ensure that the overheating fuse -A- is tripped at the correct temperature, it must be positioned without play in the housing and the mount -B- must be free from contamination and corrosion. |
| t
| The overheating fuse -A- is part of the wiring harness and cannot be replaced separately at present. |
|
|
|
