A4 Cabriolet Mk2
Exploded view - hydraulic system |
1 - | Brake fluid reservoir |
2 - | Supply hose |
q | For master cylinder |
3 - | Pipe/hose assembly |
q | For plug-in connections on master cylinder and slave cylinder |
q | Disconnecting from master cylinder and installing → Chapter |
q | Disconnecting from slave cylinder → Fig. |
q | Allocation for LHD and RHD vehicles → Electronic parts catalogue |
4 - | Grommet |
5 - | Mounting bracket |
6 - | Clutch pedal |
7 - | Master cylinder |
q | Removing and installing → Chapter |
q | Do not remove clip -arrow A- or seal -arrow B-. |
q | To remove pipe/hose assembly, pull out clip -arrow A- as far as stop → Anchor. |
8 - | Hexagon socket head bolt |
q | 20 Nm |
9 - | Retaining clip |
q | Renew only when master cylinder has been removed |
q | Removing → Fig. |
q | Pressing on → Fig. |
10 - | Gearbox |
11 - | Slave cylinder |
q | Do not operate clutch pedal after slave cylinder has been removed. |
q | Removing and installing → Chapter |
q | After working on hydraulic clutch mechanism, bleed clutch system → Chapter |
q | Disconnecting pipe/hose assembly → Fig. |
q | Do not allow brake fluid to come into contact with gearbox. |
12 - | Bleeder valve |
q | Tighten to 4.5 Nm |
q | Follow correct procedure when bleeding → Chapter |
q | If bleeder valve has broken off, it can be removed with 3 mm Allen key |
13 - | Dust cap |
14 - | Clip |
q | To remove pipe/hose assembly, pull out clip as far as stop → Fig.. |
15 - | Bracket |
q | For pipe/hose assembly |
q | Attached to gearbox together with slave cylinder |
16 - | Hexagon socket head bolt |
q | 25 Nm |
q | Slave cylinder to gearbox |
q | Self-locking |
q | Always renew |
17 - | Retaining clip |
18 - | Seal |
19 - | Securing bolt |
q | For brake fluid reservoir |
|
|