A4 Cabriolet Mk2
Exploded view - pedal cluster (RHD vehicles) |
1 - | Mounting bracket |
q | Removing and installing → Rep. Gr.46 |
2 - | Washer |
3 - | Brake pedal |
4 - | Hexagon socket head bolt |
q | 5 Nm |
q | For securing the bearing sleeve |
5 - | Hexagon socket head bolt |
q | 25 Nm |
6 - | Clutch pedal switch -F36- |
q | Removing and installing → Chapter |
q | Can only be installed once |
q | Must be renewed if removed |
7 - | Bearing sleeve |
q | Check for freedom of movement in clutch pedal |
8 - | Clutch pedal |
9 - | Retaining clip |
q | Removing and installing → Item |
10 - | Hexagon socket head bolt |
q | 20 Nm |
11 - | Clutch master cylinder |
q | Removing and installing → Chapter |
q | Seal -arrow- must not be removed |
12 - | Over-centre spring |
Removing and installing → Chapter |
q | For correct version, refer to → Electronic parts catalogue |
13 - | Bolt |
q | 22 Nm |
q | Self-locking |
q | Renew |
14 - | Lever |
q | Pin only fits in one position |
15 - | Washer |
16 - | Mounting |
q | For over-centre spring |
17 - | TORX bolt |
q | 25 Nm |
q | For securing brake master cylinder/brake servo to mounting bracket |
18 - | Bolt |
q | 25 Nm |