audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Mounting gearbox on assembly stand > < Removing and installing gearbox mounting

A4 Cabriolet Mk2

Checking oil level in manual gearbox
Checking oil level in manual gearbox
   
Procedure
  Note
The vehicle must be horizontal when checking gear oil level.
–  To check gear oil level, unscrew oil filler plug -arrow-.
  A34-0644
The oil level is correct when gearbox is filled up to edge of housing -arrow-.
–  Top up with gear oil if necessary. Specification → Chapter.
–  Screw in oil filler plug and tighten.
  A34-0723
Note the following when filling with new oil:
–  Remove oil filler plug -arrow-.
  A34-0644
–  Fill with gear oil up to edge of housing -arrow-.
–  Screw in oil filler plug.
–  Start engine, engage a gear and allow gearbox to turn for approx. 2 minutes.
–  Switch off engine and remove oil filler plug.
Once more, fill with gear oil up to edge of housing -arrow-.
–  Screw in oil filler plug and tighten.
Tightening torque
  A34-0723
ComponentNm
Oil filler plug45

   

Mounting gearbox on assembly stand > < Removing and installing gearbox mounting