t
| After installing a replacement gearbox, check oil level and fill up with gear oil as required → Chapter. |
t
| Thoroughly clean all joints and connections and the surrounding areas before dismantling. |
t
| When installing gearbox ensure dowel sleeves are correctly seated. |
t
| Thoroughly clean joint surfaces on gearbox housing etc. before applying sealing paste. |
t
| Apply sealing paste -AMV 188 001 02- evenly and not too thickly. |
t
| Breather holes must remain free of sealing paste. |
O-rings, oil seals and gaskets |
t
| Always renew O-rings, oil seals and gaskets. |
t
| After removing gaskets and oil seals, always inspect the contact surface on the housing or shaft for burrs resulting from removal or for other signs of damage. |
t
| Thoroughly clean housing joint surfaces before assembling. |
|
|
|