Audi Workshop Service and Repair Manuals

Removing and installing reversing light switch -F4-

Removing –  If fitted, loosen quick-release fasteners -3- and remove rear noise insulation -B-.

–  Unplug electrical connector -arrow- for reversing light switch -F4- on gearbox (right-side).

–  Unscrew reversing light switch -F4- from selector shaft cover -arrow-.

Installing –  Screw reversing light switch -F4- into selector shaft cover -arrow-.

–  Attach electrical connector -arrow- for reversing light switch -F4- on gearbox (right side).

Component	Nm
Reversing light switch -F4- in selector shaft cover	20