–
| Tighten securing bolt for selector rod -arrow-. Tightening torque → Item |
Note The gear lever must remain in the same position while the bolt is being tightened. |
Checking gear lever setting |
l
| With the gearbox in neutral, the gear lever should rest in the 3rd/4th gear gate. |
–
| Select all gears several times. |
–
| Pay particular attention to the operation of the reverse gear locking mechanism. |
t
| It should only be possible to engage reverse gear after overcoming the reverse gear detent. |
t
| The gear lever should return by itself from the reverse gear gate to the 3rd/4th gear gate. |
If the gear lever sticks or baulks repeatedly when engaging a gear, perform the adjustment procedure again. |
|
|
|