A4 Cabriolet Mk2
| ATF pipes, ATF cooler and additional ATF filter on vehicles with 6-cyl. petrol engine |
| 1 - | Bolt with washer, 21 Nm |
| 2 - | ATF pipes |
| 3 - | O-rings |
| q | Renew |
| q | Lubricate with ATF when fitting |
| 4 - | ATF pipe |
| 5 - | O-ring |
| q | Renew |
| q | Lubricate with ATF when fitting |
| 6 - | Bolt with washer, 5 Nm |
| 7 - | Bolt with washer, 10 Nm |
| 8 - | Additional ATF filter |
| q | Must be renewed if gearbox is defective |
| q | Removing and installing → Chapter |
| 9 - | Bolt with washer, 10 Nm |
| 10 - | O-ring |
| q | Renew |
| q | Lubricate with ATF when fitting |
| 11 - | ATF pipe |
| 12 - | Bolt with washer, 5 Nm |
| 13 - | Union nut, 29 Nm |
| 14 - | Centre hex stud, 10 Nm |
| t | Not fitted on 3.2 ltr. FSI engine |
| 15 - | Bracket |
| 16 - | 10 Nm |
| t | Nut with washer for 2.4 ltr. and 3.0 ltr. engines |
| t | Bolt for 3.2 ltr. FSI engine |
| 17 - | Nut with washer, 5 Nm |
| 18 - | Clip |
