audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view - selector mechanism > < Removing and installing selector mechanism cover

A4 Cabriolet Mk2

Removing and installing tiptronic switchF189
Removing and installing tiptronic switch -F189-
  Note
t  In order to renew the tiptronic switch -F189-, the printed circuit → Item must be renewed.
t  If malfunctions occur in the tiptronic switch -F189-, first check that the magnet on the transverse slide of the sliding cover is secured properly. If necessary, renew sliding cover. The printed circuit should only be renewed after the wiring has been checked.
In order to renew the tiptronic switch, the printed circuit must be renewed.
   
Removing
–  Remove selector mechanism cover → Chapter.
–  Press down the outer locking hooks -arrows- and pull the cover -2- off the guide -1-.
–  Remove printed circuit with integrated tiptronic switch -F189-.
  A37-0464
–  Check magnets -arrows- on sliding cover for firm attachment.
l  If a magnet is missing, sliding cover must be renewed
Installing
Installation is carried out in reverse sequence; note the following:
–  Install selector mechanism cover → Chapter.
  A37-10845

Exploded view - selector mechanism > < Removing and installing selector mechanism cover