Audi Workshop Service and Repair Manuals

Renewing protective ring on flange for propshaft Special tools and workshop equipment required

t  Adapter -VW 295 A-

t  Thrust plate -VW 402-

t  Press tool -VW 408 A-

t  Support rails -VW 457-

t  -3-Splitter 22...75 mm, e.g. -Kukko 17/1-

Pressing protective ring -A- off flange for propshaft B -  Splitter 12...75 mm, e.g. -Kukko 17/1-

Installation position of protective ring -A- on flange for propshaft l  The projecting ridge -arrow 1- on the protective ring -A- must be fitted in the annular groove -arrow 2- on the flange -B-. The smaller outside diameter -arrow 3- then faces towards the flange.

Pressing protective ring -A- onto flange for propshaft l  The protective ring -A- must engage in the annular groove on the flange → Fig..