A4 Cabriolet Mk2
Table of adjustments |
Note
t | If repairs have been carried out to the gearbox, it is only necessary to adjust the pinion shaft, crown wheel or final drive set if components have been renewed which have a direct effect on the adjustment of the final drive. |
t | No adjustments are required when renewing the double angular contact ball bearing on the pinion shaft. |
t | Refer to the following table to avoid unnecessary adjustment work: |
Components requiring adjustment: | Pinion shaft | Crown wheel | Backlash |
(“S3” + “S4”) | (“S1” + “S2”) | 0.12 - 0.22 | |
→ Chapter | → Chapter | → Anchor | |
Component renewed | |||
Gearbox housing | X | X | X |
Differential cage | X | X | |
Tapered roller bearings for differential | X | X | |
Final drive gear set → Note | X | X | X |
Cover for final drive | X | X |
1) | Pinion shaft and crown wheel may only be replaced together. |