–
| Detach annulus “III”-item 5- with shaft from planet carrier “III”-item 1-. |
–
| Detach flange washer -4-, axial needle bearing -3- and thrust washer -2-. |
Caution Before assembly, check the components of the planetary drive “III” for traces of wear and damage → Chapter. |
|
–
| Fit the following parts on the shaft of planet carrier “III”-item 1-: |
4 - | Flange washer (flange faces towards axial needle bearing) |
–
| Fit annulus “III”-item 5- with shaft onto planet carrier “III”-item 1-. |
|
|
|