| Removing and installing parts of cooling system |
WARNING | Hot steam/hot coolant can escape - risk of scalding. |
| The cooling system is under pressure when the engine is hot. |
| Cover filler cap on coolant expansion tank with a cloth and open carefully to dissipate pressure. |
|
Note | t
| The cooling system is under pressure when the engine is hot. If necessary, relieve pressure before commencing repair work. |
| t
| Secure all hose connections with the correct type of hose clips (same as original equipment) → Parts catalogue. |
| t
| Hose clip pliers -V.A.G 1921- or spring-type clip pliers -VAS 5024 A- are recommended for use in installing spring-type clips. |
| t
| Renew gaskets and seals. |
| t
| The arrow markings on coolant pipes and on ends of hoses must align. |
|
|
|
