–
| Lubricate new O-ring -3- with coolant additive. |
l
| Installation position: Sealing plug in housing faces downwards. |
–
| Tighten bolts -1- for coolant pump. |
The remaining installation steps are carried out in the reverse sequence. |
–
| Fit toothed belt (adjust valve timing): |
t
| Vehicles with hydraulically damped tensioning roller - engine codes AVB, AVF, AWX → Anchor. |
t
| Vehicles with friction-damped tensioning roller - engine codes AVB, AVF, AWX → Anchor. |
t
| Engine codes BKE, BPW, BRB, BRC → Anchor. |
|
|
|