Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing coolant pipe (bottom) >
< Removing, installing and checking thermostat
A4 Cabriolet Mk2
Power unit
4-cylinder TDI unit injector engine (2.0 ltr. 4-valve), mechanics
Engine cooling / Removing and installing parts of cooling system
Removing and installing coolant pipe (top)
Removing and installing coolant pipe (top)
Removing and installing coolant pipe (top)
Special tools and workshop equipment required
t
Hose clip pliers -V.A.G 1921-
Removing
–
Drain off coolant
→ Chapter
.
–
Move electrical wiring clear of coolant pipe (top).
–
Unscrew bolts
-1-
and
-2-
and detach top coolant pipe from coolant hoses
-arrows-
.
Installing
Installation is carried out in the reverse order; note the following:
Note
Secure all hose connections with the correct type of hose clips (same as original equipment)
→ Electronic parts catalogue
.
–
Fill cooling system
→ Anchor
.
Tightening torques
Component
Nm
Coolant pipe
Engine lifting eye
10
(top) to:
Oil filter bracket
10
Power unit
4-cylinder TDI unit injector engine (2.0 ltr. 4-valve), mechanics
Engine cooling / Removing and installing parts of cooling system
Removing and installing coolant pipe (top)
Removing and installing coolant pipe (bottom) >
< Removing, installing and checking thermostat