A4 Cabriolet Mk2
Connection diagram for coolant hoses - vehicles without exhaust gas recirculation cooler and with auxiliary heater |
1 - | Radiator |
q | Removing and installing → Chapter |
q | If renewed, refill system with fresh coolant |
2 - | Thermostat |
q | Checking → Anchor |
q | Removing and installing → Chapter |
3 - | Coolant temperature sender -G62- |
4 - | Cylinder head/cylinder block |
q | If renewed, refill system with fresh coolant |
5 - | Coolant pump |
q | Removing and installing → Chapter |
6 - | Bleeder hole |
q | On coolant hose for heat exchanger |
7 - | Heat exchanger for heater |
q | If renewed, refill system with fresh coolant |
8 - | Expansion tank |
q | With filler cap |
q | Checking pressure relief valve in filler cap → Anchor |
9 - | Heater coolant shut-off valve -N279- |
10 - | Oil cooler |
q | Removing and installing → Chapter |
q | If renewed, refill system with fresh coolant |
11 - | Auxiliary heater |
q | Removing and installing → Heating, ventilation, air conditioning system; Rep. Gr.82 |