audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing crankshaft oil seal (timing chain end) > < Drive plate on vehicles with automatic gearbox - exploded view

A4 Cabriolet Mk2

Removing and installing drive plate - vehicles with automatic gearbox
Removing and installing drive plate - vehicles with automatic gearbox
Special tools and workshop equipment required
   
t  Counterhold tool -10-201-
Removing
l  Gearbox removed.
  W00-0254
–  Insert counterhold tool -10-201- to slacken bolts.
–  Mark installation position of drive plate on engine.
–  Unbolt drive plate.
–  Take out centralising disc located behind.
  A13-0574
Installing
Installation is carried out in the reverse order; note the following:
–  Install drive plate with centralising disc -arrow- and washer.
–  Use new securing bolts.
–  Reverse position of counterhold tool -10-201- in order to tighten bolts.
Tightening torque
  A10-1036
ComponentNm
Drive plate to crankshaft60 + 90° 1)2)
l  1) Renew bolts.
l  2) 90° = one quarter turn.

   

Renewing crankshaft oil seal (timing chain end) > < Drive plate on vehicles with automatic gearbox - exploded view