Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Drive plate on vehicles with automatic gearbox - exploded view >
< Removing and installing damper unit - vehicles with multitronic gearbox
A4 Cabriolet Mk2
Power unit
6-cylinder direct petrol injection engine (3.2 ltr. 4-valve), mechanics
Enginecrankshaft group, pistons
Cylinder block (gearbox end)
Removing and installing flywheel - vehicles with multitronic gearbox
Removing and installing flywheel - vehicles with multitronic gearbox
Removing and installing flywheel - vehicles with multitronic gearbox
Special tools and workshop equipment required
t
Counterhold tool -10 - 201-
Removing
Proceed as follows:
l
Gearbox removed.
–
Remove damper unit
→ Chapter
.
–
Mark position of flywheel on crankshaft for re-installation.
–
Insert counterhold tool -10 - 201- to slacken bolts.
–
Remove bolts
-arrow-
and remove flywheel.
Installing
Installation is carried out in the reverse order; note the following:
Note
Renew bolts for flywheel.
–
Fit counterhold tool -10 - 201- the other way round to tighten bolts.
–
Install damper unit
→ Chapter
.
Tightening torque
Component
Nm
Flywheel to crankshaft
60 + 90°
1)2)
l
1)
Renew bolts.
l
2)
90° = one quarter turn.
Power unit
6-cylinder direct petrol injection engine (3.2 ltr. 4-valve), mechanics
Enginecrankshaft group, pistons
Cylinder block (gearbox end)
Removing and installing flywheel - vehicles with multitronic gearbox
Drive plate on vehicles with automatic gearbox - exploded view >
< Removing and installing damper unit - vehicles with multitronic gearbox