–
| Connect oil pressure tester -V.A.G 1342- to threaded hole for oil pressure switch. |
–
| Screw oil pressure switch -2- into oil pressure tester -V.A.G 1342-. |
Checking oil pressure switch |
–
| Connect brown wire -1- of oil pressure tester to earth (–). |
–
| Connect voltage tester -V.A.G 1527 B- with test leads from auxiliary measuring set -V.A.G 1594 C- to oil pressure switch and battery positive (+). |
l
| LED should not light up. |
–
| Renew oil pressure switch. |
Note Observe tester and LED while starting, as switching point of oil pressure switch may already be exceeded when starting. |
l
| LED should light up at 1.2 ... 1.6 bar. |
If LED does not light up: |
–
| Renew oil pressure switch. |
l
| Minimum oil pressure at idling speed: 1.5 bar. |
l
| Minimum oil pressure at 2000 rpm: 3.0 bar |
–
| Install oil pressure switch -F1- → Chapter. |
|
|
|