A4 Cabriolet Mk2
| Exhaust manifold - exploded view |
| 1 - | Exhaust manifold |
| q | Removing and installing: left-side → Chapter, right-side → Chapter |
| 2 - | Gasket |
| q | Renew |
| 3 - | 25 Nm |
| q | Renew |
| q | Coat with high-temperature paste; for high-temperature paste refer to → Electronic parts catalogue |
| q | Note tightening sequence: (left-side) → Anchor, (right-side) → Anchor |
| 4 - | Gasket |
| q | Renew |
| 5 - | 25 Nm |
| q | Renew |
| q | Tighten evenly in several stages |
| 6 - | Front exhaust pipe with starter catalytic converter and main catalytic converter |
| q | With flexible joint; do not bend flexible joint more than 10° - otherwise it can be damaged |
| q | Protect against knocks and impact |
| q | Removing and installing: left-side → Chapter; right-side → Chapter |
| q | Mounting components: left-side → Fig., right-side → Fig. |
| q | Align exhaust system so it is free of stress → Chapter |
| 7 - | Mounting strip |
| 8 - | 25 Nm |
| q | Renew |
| 9 - | Mounting strip |
| 10 - | 25 Nm |
| q | Renew |
