Caution First release retainer tabs on connector contact before detaching electrical connectors on fuel gauge sender -G-. |
|
–
| Release retainer tabs on electrical connectors -1- and -2- and then detach electrical connectors. |
Installation is carried out in the reverse order; note the following: |
–
| Plug in electrical connectors -1- and -2- and check that they have engaged properly. |
–
| Insert fuel gauge sender -G- into the guides on fuel delivery unit and press downwards until it clicks into place. |
–
| Install fuel delivery unit → Anchor, observing the instructions for connecting the battery → Rep. Gr.27. |
|
|
|