audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking wiring connection between radio R and CD changer R41 (up to week 44/06) > < Removing and installing CD changer R41 and checking wiring connection

A4 Cabriolet Mk2

Removing and installing
Removing and installing
Special tools and workshop equipment required
   
t  Radio release tool -T10057-
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing
–  Open glove box.
  W00-1042
–  Insert two radio release tools -T10057- into slots on CD changer -R41- until they engage. Pointed ends of grips must face outwards.
–  Grasp hold of grips on radio release tool -T10057- and pull CD changer -R41- out of mounting frame.
–  Release and unplug electrical connector at CD changer -R41-.
–  Press release tabs on CD changer -R41- and remove radio release tool -T10057-.
Installing
–  Attach connector.
–  Slide CD changer -R41- into mounting frame until it engages.
–  After installation, check wiring connection to radio -R- (not on radio generation II+) → Chapter.
  A91-0486

Checking wiring connection between radio R and CD changer R41 (up to week 44/06) > < Removing and installing CD changer R41 and checking wiring connection