Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Unplugging electrical connector at coolant temperature display sender G2 (vehicles with 4.2 ltr. MPI engine) >
< Unplugging electrical connector at coolant temperature display sender G2 - vehicles with 2.4 ltr. MPI engine
A4 Cabriolet Mk2
Vehicle electrics
Electrical system
Instruments, GCI
Instrument cluster / n_assignment_at_coolant_temperature_display_sender_g2/">Pin assignment at coolant temperature display sender G2
Unplugging electrical connector at coolant temperature display sender G2 - vehicles with 3.0 ltr. MPI engine
Unplugging electrical connector at coolant temperature display senderG2 - vehicles with 3.0 ltr. MPI engine
Unplugging electrical connector at coolant temperature display sender -G2- - vehicles with 3.0 ltr. MPI engine
Procedure
–
Pull off engine cover (rear)
-arrows-
.
–
Unscrew bolts for solenoid valve retaining plate
-3-
-arrows-
.
–
Detach air intake hose
-1-
at air mass meter -G70-.
–
Pull off hose
-4-
at air duct
-2-
.
–
Unscrew bolt
-arrow-
and pull off air duct
-2-
at throttle valve module -J338-.
–
If fitted, pull off hose
-1-
at air duct.
Note
For illustration purposes the air duct is shown from the rear with the engine removed.
–
Unplug electrical connector
-2-
at coolant temperature display sender -G2-.
Note
Disregard
-item 1-
.
Install in reverse order.
Vehicle electrics
Electrical system
Instruments, GCI
Instrument cluster / n_assignment_at_coolant_temperature_display_sender_g2/">Pin assignment at coolant temperature display sender G2
Unplugging electrical connector at coolant temperature display sender G2 - vehicles with 3.0 ltr. MPI engine
Unplugging electrical connector at coolant temperature display sender G2 (vehicles with 4.2 ltr. MPI engine) >
< Unplugging electrical connector at coolant temperature display sender G2 - vehicles with 2.4 ltr. MPI engine