Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing radio-controlled clock receiver J489 >
< Unplugging electrical connector at coolant temperature sender G62 - vehicles with 2.0 ltr. TDI engine
A4 Cabriolet Mk2
Vehicle electrics
Electrical system
Instruments, GCI
Instrument cluster / n_assignment_at_coolant_temperature_sender_g62/">Pin assignment at coolant temperature sender G62
Unplugging electrical connector at coolant temperature sender G62 - vehicles with 2.7 ltr. or 3.0 ltr. TDI engine
Unplugging electrical connector at coolant temperature senderG62 - vehicles with 2.7 ltr. or 3.0 ltr. TDI engine
Unplugging electrical connector at coolant temperature sender -G62- - vehicles with 2.7 ltr. or 3.0 ltr. TDI engine
Procedure
–
Carefully pull engine cover panel off four retaining pins one after the other
-arrows-
.
–
Detach crankcase breather hose from air pipe
-arrow-
.
–
Remove bolts
-2-
and
-3-
.
–
Loosen hose clip
-1-
and remove air pipe at air mass meter -G70- and at turbocharger.
–
Unplug electrical connector
-1-
at coolant temperature sender -G62-.
Note
Disregard
-item 2-
.
Vehicle electrics
Electrical system
Instruments, GCI
Instrument cluster / n_assignment_at_coolant_temperature_sender_g62/">Pin assignment at coolant temperature sender G62
Unplugging electrical connector at coolant temperature sender G62 - vehicles with 2.7 ltr. or 3.0 ltr. TDI engine
Removing and installing radio-controlled clock receiver J489 >
< Unplugging electrical connector at coolant temperature sender G62 - vehicles with 2.0 ltr. TDI engine