audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Multi-pin connectors on instrument cluster > < Fault message "dEF” in trip recorder display

A4 Cabriolet Mk2

Removing and installing instrument cluster
Removing and installing instrument cluster
Special tools and workshop equipment required
   
t  Front-end hook -3370-
Removing
  Note
The instrument cluster must not be dismantled.
–  If instrument cluster with control unit in dash panel insert -J285- is to be renewed, select the “Replacement” function for -J285- in “Guided Functions” mode → Vehicle diagnosis, testing and information system VAS 5051.
–  Switch off ignition and take out ignition key.
–  Lower steering wheel as far as possible to downwards and to rear; use full range of the steering column adjuster.
  Note
The steering wheel is shown removed in the following illustrations to provide a better view.
  W00-0509
–  Pull off instrument cluster trim at bottom towards rear -arrows- using front-end hook -3370-.
–  Disengage instrument cluster trim at top.
  A90-0173
–  Unscrew bolts -arrows-.
  A90-0172
–  Carefully release instrument cluster and pull out towards rear.
  A90-0174
–  Release retaining clip for electrical connectors -arrow- and unplug connectors.
Installing
Install in reverse order.
  A90-0157

Multi-pin connectors on instrument cluster > < Fault message "dEF” in trip recorder display