Audi Workshop Service and Repair Manuals > A4 Cabriolet Mk2 > Vehicle electrics | Electrical system | Lights, lamps, switches inside, anti-theft system | Switches | Removing and installing rear lid contact switch

Removing and installing rear lid contact switch

Removing

–	Remove rear lid lock → Rep. Gr.55.

–	Use flat screwdriver to pry plastic tab -3- off retaining pins -1-.

–	Fold plastic tab completely to rear.

–	First pull contact switch -2- to one side and then upwards out of lock for rear lid.

Installing

Installation is carried out in the reverse order; note the following:

Note

Make sure washers are properly positioned between plastic tab and lock for rear lid.

–	Install rear lid lock → Rep. Gr.55.

Audi Workshop Service and Repair Manuals