audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing garage door operation control unit J530 - vehicles up to model year 2006 > < Removing and installing interior monitor deactivation switch E183 and rear lid release switch E165

A4 Cabriolet Mk2

Removing and installing switches for seat memory with seat memory ON/OFF button
Removing and installing switches for seat memory with seat memory ON/OFF button
Special tools and workshop equipment required
   
t  Removal wedge -3409-
  W00-0016
Removing
–  Remove switch -1- for seat memory with seat memory ON/OFF button from door trim using removal wedge -3409-.
–  Unplug electrical connector.
  A96-10088
–  Use small screwdriver to carefully release retaining hooks -arrows-.
–  Pull off switch -1- for seat memory with seat memory ON/OFF button from switch mounting -2- downwards.
Installing
Installation is carried out in the reverse order; note the following:
–  Press switch into switch mounting until retaining hooks engage.
  A96-10089

Removing and installing garage door operation control unit J530 - vehicles up to model year 2006 > < Removing and installing interior monitor deactivation switch E183 and rear lid release switch E165