Audi Workshop Service and Repair Manuals > A4 Cabriolet Mk2 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | Fog lights - vehicles from model year 2007 onwards | Removing and installing fog lights

Removing and installing fog lights - Audi A4

Removing

–	Switch off ignition and take out ignition key.

–	Turn light switch to position “0”.

Vehicles without charge air cooler:

–	On vehicles with auxiliary heater, unscrew bolts -arrows- for exhaust pipe of auxiliary/supplementary heater at noise insulation.

–	Unfasten bolts/quick-release fasteners -1- and -2- and detach noise insulation (front).

Vehicles with charge air cooler:

–	Remove front bumper cover → Rep. Gr.63.

All models:

–	Unscrew bolts -arrows-.

–	Unplug electrical connector -2-.

–	Detach fog light -1-.

Installing

Installation is carried out in the reverse order; note the following:

Vehicles with charge air cooler:

–	Install front bumper cover → Rep. Gr.63.

All models:

–	Adjust fog lights → Booklet805.

Tightening torque

Component	Nm
Fog light housing to bumper cover	6

Audi Workshop Service and Repair Manuals