audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adjusting headlights for driving on the left or right side of the road - vehicles without adjustment lever > < Installing repair kit for headlight housing

A4 Cabriolet Mk2

Adjusting headlights for driving on the left or right side of the road - vehicles with adjustment lever
Adjusting headlights for driving on the left or right side of the road - vehicles with adjustment lever
When travelling in countries where the vehicle is to be driven on the other side of the road, both headlights must be adjusted to prevent dazzling by the asymmetric dipped beam.
Procedure
  WARNING
High voltage! Danger to life!
Safety precautions when handling gas discharge bulbs → Electrical system; General information; Rep. Gr.94.
Headlight (left-side):
–  Remove washer fluid reservoir (top section) and power steering reservoir → Chapter.
Headlight (right-side) - vehicles with 1.8 ltr. turbo engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 2.0 ltr. TFSI engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 3.2 ltr. FSI engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 4.2 ltr. MPI engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 2.0 ltr. TDI engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 2.7 ltr. or 3.0 ltr. TDI engine:
–  Remove air cleaner housing → Chapter.
   
Both sides (continued):
–  Remove bolts -1- and -2-.
–  Detach cover for dipped beam from headlight housing -arrow-.
  A94-10082
–  Check position of adjustment lever -1- at both headlights.
l  Lever down = Driving on right
l  Lever up = Driving on left
–  If necessary, swivel lever until it engages in desired position -arrow-.
–  Close housing cover.
  A94-10145

Adjusting headlights for driving on the left or right side of the road - vehicles without adjustment lever > < Installing repair kit for headlight housing