–
| Unscrew nut -1- and bolts -4- and -5-. |
–
| Remove breather hose -2- from washer fluid reservoir (top section) -3-. |
–
| Detach washer fluid reservoir (top section) and move power steering reservoir -6- to side with hydraulic hoses still attached. |
Installation is carried out in the reverse order; note the following: |
Note t
| Clean thread of bolts from remnants of locking fluid using wire brush. Then apply locking fluid and fit bolts. Locking fluid → Electronic parts catalogue. |
t
| Clean tapped holes from remnants of self-locking bolts or locking fluid (e.g. using a thread tap). Otherwise the bolts can shear off if they have to be removed again later. |
Install in reverse order. |
|
|
|