audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for turn signal > < Renewing bulb for main beam headlights

A4 Cabriolet Mk2

Renewing bulb for side lights
Renewing bulb for side lights
  WARNING
High voltage! Danger to life!
Safety precautions when handling gas discharge bulbs → Electrical system; General information; Rep. Gr.94.
   
Removing
–  With ignition switched off, disconnect earth cable at battery → Chapter.
–  Remove headlight → Chapter.
–  Release retaining clips -arrows- and detach housing cover from headlight housing.
  A94-10078
–  Pull holder -1- for side light bulb out of housing -arrow-.
–  Pull bulb -2- for side lights out of bulb holder.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert new bulb in bulb holder, taking care not to touch glass bulb with bare hands.
–  Slide holder into guide on headlight housing up to the limit stop.
–  Secure housing cover with retaining clip.
–  Install headlight → Anchor.
–  Connect battery. Steps required → Anchor.
  A94-0374

Renewing bulb for turn signal > < Renewing bulb for main beam headlights