audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for main beam headlights > < Adjusting headlights

A4 Cabriolet Mk2

Renewing bulb for dipped beam headlights
Renewing bulb for dipped beam headlights
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
–  Unscrew bolts -arrows-.
–  Detach activated charcoal filter solenoid valve 1 -N80--item 1- at air duct.
–  Remove air duct -2-.
  A10-0900
–  Release retaining tab -arrow- and detach housing cover from headlight housing.
  A94-10121
–  Remove bulb -2- from spring clips -arrows-.
–  Detach electrical connector -1- at dipped beam bulb.
Installing
Installation is carried out in the reverse order; note the following:
–  Fit new bulb in housing; do not touch the glass part of the bulb with bare hands.
–  Position bulb at lower spring clip.
–  Push bulb beyond resistance of upper spring clips into housing.
–  Plug in connector and close housing cover.
  A94-10122

Renewing bulb for main beam headlights > < Adjusting headlights