audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Number plate light > < High-level brake light

A4 Cabriolet Mk2

Removing and installing high-level brake light
Removing and installing high-level brake light
   
Removing
–  Do not press brake pedal.
–  Remove rear lid trim → Rep. Gr.70.
–  Unscrew bolts -arrows-.
–  Remove high-level brake light -1- from body opening.
–  Unplug electrical connector -2-.
Installing
Installation is carried out in the reverse order; note the following:
  Note
If the LEDs are defective, the complete high-level brake light must be renewed.
–  Install rear lid trim → Rep. Gr.70.
Tightening torque
  A94-0353
ComponentNm
Brake light to rear lid3

   

Number plate light > < High-level brake light