audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear parking aid senders > < Removing and installing front parking aid senders - vehicles up to model year 2006

A4 Cabriolet Mk2

Removing and installing front parking aid senders - vehicles from model year 2007 onwards
Removing and installing front parking aid senders - vehicles from model year 2007 onwards
   
Removing
Outer senders - vehicles without charge air cooler/auxiliary radiator:
–  On vehicles with auxiliary heater, unscrew bolts -arrows- for exhaust pipe of auxiliary/supplementary heater at noise insulation.
  A10-0407
–  Unfasten bolts/quick-release fasteners -1- and -2- and detach noise insulation (front).
Outer senders - vehicles with charge air cooler/auxiliary radiator:
–  Remove front bumper cover → Rep. Gr.63.
Inner senders:
–  Remove front bumper cover → Rep. Gr.63.
–  Remove radiator grille → Rep. Gr.63.
  A10-1320
Both versions:
–  Unplug electrical connector -1- at sender.
–  Press both retaining tabs aside -arrows- and press out sender -2- inwards.
Installing
Installation is carried out in the reverse order; note the following:
Outer senders - vehicles with charge air cooler/auxiliary radiator:
–  Install front bumper cover → Rep. Gr.63.
Inner senders:
–  Install front bumper cover → Rep. Gr.63.
–  Install radiator grille → Rep. Gr.63.
  A94-10062

Removing and installing rear parking aid senders > < Removing and installing front parking aid senders - vehicles up to model year 2006