Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing front parking aid warning buzzer H22 (8-channel parking aid) >
< Parking aid - overview
A4 Cabriolet Mk2
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Parking aid
Removing and installing parking aid control unit J446
Removing and installing parking aid control unitJ446
Removing and installing parking aid control unit -J446-
Removing
Fitting location: in luggage compartment (rear left) at wheel housing
–
To renew control unit, select the “Replacement” function for the appropriate control unit in “Guided Functions” mode
→ Vehicle diagnosis, testing and information system VAS 5051
.
–
Remove luggage compartment side trim (left side)
→ Rep. Gr.70
.
–
Unscrew bolts
-arrows-
and remove base retainer.
–
Unplug electrical connectors.
–
Unplug electrical connectors
-1-
.
–
Unscrew nuts
-arrows-
.
–
Detach parking aid control unit -J446-
-item 2-
.
Installing
Installation is carried out in the reverse order; note the following:
–
Install luggage compartment side trim (left-side)
→ Rep. Gr.70
.
Tightening torque
Component
Nm
Parking aid control unit -J446- to body
1.8
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Parking aid
Removing and installing parking aid control unit J446
Removing and installing front parking aid warning buzzer H22 (8-channel parking aid) >
< Parking aid - overview