Note | The setting dimensions are calculated to allow for the motion of the vehicle when driving. When the vehicle is stationary the direction of the jets will be slightly different. |
| –
| Use water-soluble pen to mark the four points on windscreen: |
| l
| Dimension -a- = 340 mm. |
| l
| Dimension -b- = 500 mm. |
| l
| Dimension -c- = 450 mm. |
| l
| Dimension -d- = 280 mm. |
| –
| Aim individual washer jets at these points using adjusting tool -T10127-. |
| –
| If spray pattern does not match specifications, the washer jet is clogged up and must be cleaned. |
| –
| Rinse washer jet with clear water in opposite direction of spray. |
| –
| Always blow through washer jet in opposite direction of spray when removing remaining particles of dirt by applying compressed air. |
| If spray pattern still does not meet specifications. |
|
|
|
