–
| Cut washer fluid hose at point of damage using cutting pliers -VAS 6228-. |
–
| Join the severed ends -1 and 4- of the washer fluid hose using connection pieces -2 and 3-. |
–
| Push shrink hose -5- over one end of washer fluid hose and fit connection pieces together. |
–
| Push shrink hose over connection pieces on washer fluid hose. |
–
| After pushing on the shrink hose, shrink-fit it using hot air blower -VAS 1978/14A-. |
l
| The shrink hose must be heated starting from the centre and working outwards until it is sealed tight. |
l
| Set hot air blower to appropriate temperature as indicated in operating instructions. |
l
| When shrink-fitting, ensure no other wires, plastic components or insulating materials are damaged by the hot nozzle. |
–
| Check operation and test for leaks. |
|
|
|