Audi Workshop Service and Repair Manuals > A4 Mk1 > Body | Fitting instructions: retrofitting key-operated switch to deactivate airbag on front passenger side | Passenger protection | Retrofitting key-operated switch (Audi A6 2005 ?)

Installing glove box

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1783-

Installing glove box

–	Plug in electrical connector at central connector.

–	Thread connectors for CD changer -R41- through opening in glove box.

–	Take care not to trap any wires when installing glove box.

–	Screw in bolts -arrows- and tighten to specified torque.

Installing CD changer -R41-

–	Detach protective cap for wiring harness connector VAS 6223/9 -1- from connector of optical fibre -2-.

–	Plug in connectors at CD changer -R41-.

–	Slide CD changer -R41--3- into glove box. Take care not to trap any wires.

1 -	Key-operated switch to deactivate airbag on front passenger side -E224-

2 -

Mounting

Tightening torque

Component	Nm
Glove box to dash panel	3

Audi Workshop Service and Repair Manuals