Audi Workshop Service and Repair Manuals

• ‒ → Unscrew self-tapping screws -2- and remove cover -1-.
• ‒ On installation, position cover -1- in top of roof flange using notches -arrow- and tighten screws -2- to 2.5 Nm.

• ‒ → Dismantle rear roof frame trim.

=> General Body Assembly; Repair group 70

• ‒ Unscrew hexagon nut -5-.
• ‒ Unscrew hexagon bolt -1-.
• ‒ On installation renew seal -3-.
• ‒ Tightening torque for hexagon nut and bolt: 21 Nm.