audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing operating rods for rear door lock > < Removing and installing inner door seal

A4 Mk1

General Body Assembly
Removing and installing rear door lock with operating elements
Removing and installing rear door lock with operating elements
 
A58-0008
  • Bolt (2x)
    • ◆ Tightening torque 9.5 Nm.
  • Lock base plate
  • Door lock
    • ◆ Removal:
    • ‒ Remove door subframe =>Page 58-2
    • ‒ Unclip Bowden cable -4- for inside door mechanism.
    • ‒ Unclip pipe for central locking system.
    • ‒ Unclip operating rods.
    • ‒ Unscrew bolts -1- and take out lock to inside.
    • ◆ Installation:
    • ‒ Install in reverse order.
 
A58-0008
  • Bowden cable for interior door handle
    • ◆ Removal:
    • ‒ Remove door subframe =>Page 58-2
    • ‒ Release Bowden cable (shown released in magnified view), unclip downwards and disengage from door lock.
    • ◆ Installation:
    • ‒ Install in reverse order.

Removing and installing operating rods for rear door lock > < Removing and installing inner door seal