Audi Workshop Service and Repair Manuals

• Seat extension

• ◆ Removing
• ‒ Raise seat as far as possible.
• ‒ Remove seat .
• ‒ Use pliers or screwdriver to press the two springs -2- inwards (arrow).
• ‒ Remove seat height adjuster unit -1-.
• ‒ If fitted, detach heating connectors on both sides.
• ‒ Fold up front trim panel -3- and route cables through.

• Springs (2x)
• Front trim panel

• ◆ Removing
• ‒ If necessary, (e.g. when removing cushion) detach trim panel completely.
• ◆ Installing
• ‒ Route connectors of seat heating cable on either side through holes in trim panel -3- and insert connectors.
• ‒ Attach trim panel.

• Guide sleeves (2x)

• ◆ Removing
• ‒ If necessary, (e.g. when removing cushion) squeeze guide sleeves -4- together using gripping pliers and pull out guide sleeves.
• ◆ Installing

Note:

Always replace the two guide sleeves when installing.