Audi Workshop Service and Repair Manuals

Removing steering column switch

• ‒ Release steering column adjuster.
• ‒ Pull steering column all the way out.
• ‒ → Unscrew bolt -1- (2x). Tightening torque 3 Nm.
• ‒ Remove grip -2-.

• ‒ → Remove two cross head screws -arrows-.
• ‒ Tightening torque 0.6 Nm.
• ‒ Remove upper trim panel for steering column switch - 1-.

When installing, insert upper shell into hooks of lower shell, swivel downwards and screw in place.

• ‒ → Remove screws -2- (2x). Tightening torque 0.6 Nm.
• ‒ Remove hexagon socket head bolt -1-.
• ‒ Tightening torque 0.6 Nm
• ‒ Remove lower trim for steering column switch -3-.

• ‒ → Detach connector -1-.
• ‒ Unfasten bolt -2-.
• ‒ Tightening torque 3 Nm
• ‒ Disconnect plug -3-.
• ‒ Remove steering column switch -4-.