Audi Workshop Service and Repair Manuals

• ‒ → Unscrew bolt -1-. Tightening torque 1.5 Nm.
• ‒ Remove grip moulding -2- downwards from door trim -4-.
• ‒ Unscrew bolt - 3- (1x). Tightening torque 2.5 Nm.
• ‒ Vehicles with window crank =>Page70-19

• ‒ → Remove bolt -1- (2x). Tightening torque 1.5 Nm.
• ‒ Lift door trim -3- out of door shell.
• ‒ Spacers -4- for engaging hooks -2- (7x) must have been clipped in completely for installation.

Note:

Bowden cable for inside door mechanism and connectors are not to be detached until door trim -3- has been taken out.

• ‒ → Pull out Bowden cable -1- from guide -2- and detach.

Note:

When installing, ensure hook -3- is facing upwards.

• ‒ Unplug connectors.