audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing central flap positioning motor -V70 > < Removing and installing footwell/defrost flap positioning motor -V85

A4 Mk1

Heating, Air Conditioner
Components for the control and regulation of air conditioners up to Model Year 1996
Removing and installing temperature flap positioning motor -V68

Removing

  • ‒ Remove the footwell vents .
 
A87-0045
  • ‒ → Screw out the bolts -A-.
  • ‒ Detach the connector (colour code black) to the positioning motor.

Note:

In right-hand drive vehicles, the colour coding for the connector is violet.

  • ‒ Unclip the reversing lever -B-.
  • ‒ Remove the positioning motor.

Installing

Installation is carried out in the reverse order; note the following:

  • ‒ When installing the positioning motor, check that the reversing lever -B- is correctly seated.
  • ‒ Interrogate fault memory => Page 01-63.

Removing and installing central flap positioning motor -V70 > < Removing and installing footwell/defrost flap positioning motor -V85