Audi Workshop Service and Repair Manuals

Removing

• ‒ Remove the glove box

=> General Body Assembly, Interior; Repair group 68; Storage compartments/covers; Removing and installing glove box

• ‒ Remove the condensation drainage hose and valve downwards out of the floor panel

Note:

The drain funnel and the foam seal may only be replaced with the air conditioner removed .

Installing

Installation is carried out in the reverse order; note the following:

• ◆ → The foam seal -B- must lie flat on the drain funnel -C-.
• ◆ The washer -A- must be attached to the condensation drain to support the foam seal.

Note:

The grommet -D- on the air conditioner's condensation drain prevents the condensation water from running back into the foam seal.

• ◆ → The funnel -C- must be screwed to the floor panel.

Note:

The function of the drain valve -E- must not be impaired.