audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing air-flow flap > < Dismantling and assembling air conditioner - vehicles up to Model Year 1996

A4 Mk1

Heating, Air Conditioner
Dismantling and assembling air conditioner - vehicles up to Model Year 1996
Disassembling and assembling evaporator housing
 
A87-0060
  • ‒ Dismantle the air conditioner =>Page 87-164
  • Intake
    • ◆ With air-flow flap
    • ◆ Removing and installing air flow flap =>Page 87-168
    • ◆ Before assembly, coat the sealing surfaces to the top half of housing with silicone rubber.
  • Vacuum unit for fresh-air and recirculated-air flap
    • ◆ Removing and installing =>Page 87-163
  • Upper section of housing
 
A87-0060
  • Gasket
    • ◆ Glued into the top half of the evaporator housing
  • Evaporator
  • Bracket
    • ◆ Prise off using a screwdriver
  • Intake ring
    • ◆ Secured by a cast pin to the lower half of the housing to prevent turning
  • Bottom part of housing
    • ◆ Before assembly, coat the sealing surfaces to the top half of housing with silicone rubber.
  • Fresh-air blower -V2
    • ◆ Removing and installing =>Page 87-67

Removing and installing air-flow flap > < Dismantling and assembling air conditioner - vehicles up to Model Year 1996