|
Removing compressor from and attaching it to bracket; removing and installing compressor bracket
Removing compressor from and attaching it to bracket; removing and installing compressor bracket
Notes:
-
◆ You may remove and install the compressor bracket without opening the refrigerant pipes.
-
◆ Do not drain the refrigerant circuit, do not detach the refrigerant hoses and lines at the compressor.
-
◆ After removal, secure the compressor with a wire, for example, to the side member. Do not leave compressor hanging from the refrigerant pipes.
-
◆ Mark the direction of rotation with chalk or felt pen before removing the ribbed belt. If the belt rotates in the wrong direction when it is refitted. this can cause breakage.
|
